Conditions first
Flat lots with wide frontage, deep rear yards, and frequent detached structures at the back of the parcel. We inspect boundary location, grade changes, gate clearance, post conditions, and daily access before defining the scope.
Valley Glen, CA · 91401, 91405, 91606
Fence & Gate Projects in Valley Glen
Custom fences and gates—wood, composite, metal—designed around the architecture, privacy, and daily access.
DIRECT ANSWER
Fency Builders Inc. (CSLB #1104099, B — General Building) reviews and coordinates fence & gate project requests in Valley Glen, including Los Angeles Valley College area, Erwin Street, Hazeltine corridor, Oxnard Street blocks, the Tujunga Wash greenway. Contract eligibility, permit responsibility, and any required specialty licensee are confirmed in writing before work begins. Call (818) 747-4020 to request a scope review.
LOCAL CONTEXT
What Valley Glen properties need.
Where a rear unit exists, the fence stops being one line and becomes a plan: a private line for the main house, a defined path and gate for the rear tenant, and hardware rated for daily use rather than occasional. Getting that layout right up front avoids rebuilding it later.
Quiet flat streets of post-war homes, many with added units or converted garages, so boundary and access questions recur in local scope reviews. Flat lots with wide frontage, deep rear yards, and frequent detached structures at the back of the parcel.
- Wood, composite, and metal fence systems
- Driveway and pedestrian gates with coordinated posts and hardware
- Repair, replacement, and adjoining wall or hardscape transitions
Fence and gate lines on a Valley Glen lot
Where a rear unit or converted garage exists, the fence becomes a circulation plan. The written layout should define privacy for the main house and a route to the street for the rear occupant before posts, gates, and pricing are finalized.
The frontage is the other half. A proposed street-facing line should be checked against the parcel, applicable height rules, and the block context; privacy height can then be concentrated where the approved side and rear scope allows it.
Hardware gets specified for frequency, not appearance. A gate a rear tenant opens several times a day is a different product from a gate the owner opens on trash night, and the hinge, latch, and post that survive the first will not be the same as the ones that survive the second.
PROPERTY-SPECIFIC PLANNING
How we assess fence & gate work in Valley Glen.
An estimate starts with the actual parcel. We do not treat citywide guidance as approval for a specific address.
Confirm the path
City of Los Angeles Department of Building and Safety is the relevant local authority. Permit, planning, HOA, coastal, hillside, or fire-zone requirements are confirmed for the address before work begins.
Fit the property
Where a rear unit exists, the fence stops being one line and becomes a plan: a private line for the main house, a defined path and gate for the rear tenant, and hardware rated for daily use rather than occasional. Getting that layout right up front avoids rebuilding it later. The proposed solution is then documented around the verified conditions.
Portfolio imagery is representative of this trade unless a project is specifically identified as verified in Valley Glen.
VERIFIED LOCAL WORK
Work performed in Valley Glen.
Each photo below is a project our office confirmed was built in Valley Glen.
LOCAL CASE STUDY
A documented project in Valley Glen.
Scope, materials, site challenge and result — recorded by our office for work completed in Valley Glen.
Aluminum Horizontal-Slat Driveway & Pedestrian Gate — Valley Glen
Completed June 2023- Scope
- Fency Builders Inc installed a wide swing driveway gate and a matching pedestrian walk-through gate at a Valley Glen single-family residence. The driveway gate is hinged and spans the full width of a concrete driveway approach beneath an existing carport opening, flanked on the left by a white vinyl privacy fence panel. A separate pedestrian gate is hinged directly to the stucco wall on the side yard, providing independent foot-traffic access.
- Materials
- All gate panels are fabricated from steel or aluminum rectangular tube frames and flat horizontal slats finished in a uniform tan/sand powder coat; the pedestrian gate is fitted with a black keypad-style pushbutton lockset; the driveway gate is automated with a LiftMaster linear actuator operator mounted to the gate frame and wall, with an external control box also surface-mounted to the stucco; existing white vinyl privacy fence panels adjoin the driveway gate on the left side.
- Site challenge
- Valley Glen lots carry wide driveway frontages that require a gate spanning a substantial opening without intermediate posts, placing significant cantilevered load on the hinge posts and gate frame. The site also sits beneath an existing carport roof structure, requiring the gate to operate and clear within a tight vertical envelope defined by the roofline.
- How we solved it
- The driveway gate uses a heavy-tube perimeter frame with uniform horizontal slat infill to distribute weight evenly and resist racking across the full span. Heavy-duty barrel hinges are installed at the top and bottom of both the driveway and pedestrian gate stiles, anchored to the existing wall and a dedicated gate post to manage the load. The horizontal slat pattern reduces wind-load surface area compared to a solid panel, which is directly relevant on a wide-frontage swing gate of this span — applicability to City of Los Angeles Department of Building and Safety structural requirements should be confirmed.
- Result
- Both gates are plumb, gap-consistent, and show uniform powder-coat finish with no visible misalignment between slats or frame members. The driveway gate and pedestrian gate match in profile and color, presenting a cohesive appearance alongside the adjacent white vinyl fence and stucco wall.
CURATED PROJECT IMAGERY
Additional verified fence & gate examples from our project library.
SELECTED GOOGLE REVIEWS
Customer feedback that mentions fence and gate work.
A selection of reviews shared on our Google Business Profile, with each reviewer’s own name attached.
Fency repaired my fence and built and installed two new sliding gates. I really appreciate the excellent craftsmanship and the fair price. Most importantly, Jonathan oversaw the project with attention to detail and to my requests through to project completion.
Jonathan and his team did an amazing job with our new front yard fence driveway and pedestrian gates. They were professional. They were active. The fence is beautiful. It’s been enough of the envy of our neighborhood that we’ve received repeated request for contact information from Jonathan. We hope to see more of the same in our neighborhood as it’s really aesthetically pleasing cannot recommend him in his crew more highly. We hope to work with them again in the future as no needs arise thank you so much guys
COMMON QUESTIONS
Fence & Gate in Valley Glen — questions answered.
Straight answers about permits, timelines, materials, and what actually determines the result.
Yes. Fency Builders Inc. (CSLB #1104099, B — General Building) reviews fence & gate requests in Valley Glen and nearby areas including Los Angeles Valley College area, Erwin Street, Hazeltine corridor, Oxnard Street blocks, the Tujunga Wash greenway. Contract eligibility and any required specialty licensee are confirmed in writing.
Length or square footage, material, access, and site conditions all matter. In Valley Glen, flat lots with wide frontage, deep rear yards, and frequent detached structures at the back of the parcel. The written scope identifies which local conditions and licensed trades affect pricing.
Requirements depend on the property and written scope. Projects in Valley Glen are reviewed by City of Los Angeles Department of Building and Safety. The permit applicant, required classification, and responsible licensee are confirmed after scope review; no permit under the B license is promised in advance.
Scheduling depends on the approved scope, access, materials, engineering, permit review, inspections, weather, and licensed-trade availability. A project-specific sequence is provided in writing rather than a blanket timeline.
VALLEY GLEN PROJECT REQUEST
Tell us about the property.
Send the address area, the type of work, and what matters most. We review the details before the first conversation.
(818) 747-4020Fency Builders Inc · CSLB License #1104099
Serving Valley Glen and greater Los Angeles
Serving Valley Glen and greater Los Angeles
LOCAL COVERAGE