Playa Vista, CA · 90094

Fence & Gate Projects in Playa Vista

Custom fences and gates—wood, composite, metal—designed around the architecture, privacy, and daily access.

Fence & Gate project from the Fency Builders portfolio
DIRECT ANSWER

Fency Builders Inc. (CSLB #1104099, B — General Building) reviews and coordinates fence & gate project requests in Playa Vista, including The Bluffs, Runway district, Concert Park, Campus at Playa Vista edge. Contract eligibility, permit responsibility, and any required specialty licensee are confirmed in writing before work begins. Call (818) 747-4020 to request a scope review.

LOCAL CONTEXT

What Playa Vista properties need.

Where association review applies, the submittal comes before fabrication. It should document height, material, finish, and the shared-facing elevation without promising approval before the association reviews the property-specific proposal.

A planned community of newer homes where private outdoor space is compact and association design review may apply; requirements must be confirmed for the property. Flat engineered lots with compact courtyards, roof decks, and shared walls or narrow separations.

  • Wood, composite, and metal fence systems
  • Driveway and pedestrian gates with coordinated posts and hardware
  • Repair, replacement, and adjoining wall or hardscape transitions
See the full fence & gate service

Read the Los Angeles fence and wall permit guide

Driveway gates and fence lines in Playa Vista

The verified Playa Vista project record documents an ornamental steel sliding gate with a wave-profile top rail, finials, decorative cutouts, black powder coat, and an All-O-Matic slide operator.

The flat, engineered lot left limited lateral clearance at the driveway entry, so a bottom-rolling slide configuration was used instead of a swing — the track rail is anchored flush to the paver driveway surface, running parallel to the existing pink-toned split-face masonry perimeter wall rather than crossing it.

Scale mattered as much as mechanism: the gate’s wave-profile top rail and spear finials are sized to match the existing wall height, so the finished approach reads as one continuous streetside profile rather than a gate added to a wall it does not relate to.

PROPERTY-SPECIFIC PLANNING

How we assess fence & gate work in Playa Vista.

An estimate starts with the actual parcel. We do not treat citywide guidance as approval for a specific address.

01 · SITE

Conditions first

Flat engineered lots with compact courtyards, roof decks, and shared walls or narrow separations. We inspect boundary location, grade changes, gate clearance, post conditions, and daily access before defining the scope.

02 · APPROVAL

Confirm the path

City of Los Angeles Department of Building and Safety, with community design guidelines and association review is the relevant local authority. Permit, planning, HOA, coastal, hillside, or fire-zone requirements are confirmed for the address before work begins.

03 · DESIGN

Fit the property

Where association review applies, the submittal comes before fabrication. It should document height, material, finish, and the shared-facing elevation without promising approval before the association reviews the property-specific proposal. The proposed solution is then documented around the verified conditions.

Portfolio imagery is representative of this trade unless a project is specifically identified as verified in Playa Vista.

VERIFIED LOCAL WORK

Work performed in Playa Vista.

Each photo below is a project our office confirmed was built in Playa Vista.

Horizontal board wood fence with metal post — fence and gate installation by Fency Builders in Playa Vista, Los Angeles.
Playa VistaHorizontal board wood fence with metal post
LOCAL CASE STUDY

A documented project in Playa Vista.

Scope, materials, site challenge and result — recorded by our office for work completed in Playa Vista.

Ornamental Steel Sliding Driveway Gate Installation — Playa Vista in Playa Vista, California

Ornamental Steel Sliding Driveway Gate Installation — Playa Vista

Completed November 2022
Scope
Fency Builders Inc installed a custom ornamental steel sliding gate at a residential driveway entry in Playa Vista, California. The gate features a serpentine wave top rail with pointed spear finials and a lower horizontal rail with circular decorative cutouts, traveling on a ground-mounted track rail. An All-O-Matic motorized slide operator was mounted at the inside post to automate the gate.
Materials
The installation uses welded steel tube and flat bar construction with vertical pickets, a wave-profile top rail, spear-tip finials, circular ring details along the bottom rail, a galvanized ground track, flat black powder-coat finish throughout, and an All-O-Matic slide gate operator in a matching dark enclosure.
Site challenge
The flat, engineered lot typical of Playa Vista leaves the driveway entry with limited lateral clearance, requiring a sliding rather than swinging gate to avoid encroaching on the paved courtyard or adjacent hardscape. The existing pink-toned split-face masonry perimeter wall established a fixed structural boundary that the gate hardware and track had to integrate with precisely.
How we solved it
A bottom-rolling slide configuration was used, with the track rail anchored flush to the paver driveway surface so the gate travels parallel to the perimeter wall without consuming swing space. The All-O-Matic operator is positioned tight against the inside face of the end post, keeping mechanical components within the property boundary. The gate panel's wave top rail and spear finials are consistent in scale with the masonry wall height, maintaining a continuous streetside profile.
Result
The finished gate presents a uniform flat black powder-coat surface against the existing masonry wall, with ornamental detailing visible and mechanical hardware contained within the property line. The ground track, operator mounting, and gate alignment are all visibly level and plumb on the flat paver approach. Applicability of City of Los Angeles Department of Building and Safety requirements, Playa Vista community design guidelines, and HOA design review should be confirmed for any automated driveway gate of this type.
SELECTED GOOGLE REVIEWS

Customer feedback that mentions fence and gate work.

A selection of reviews shared on our Google Business Profile, with each reviewer’s own name attached.

Jonathan and his team did an amazing job with our new front yard fence driveway and pedestrian gates. They were professional. They were active. The fence is beautiful. It’s been enough of the envy of our neighborhood that we’ve received repeated request for contact information from Jonathan. We hope to see more of the same in our neighborhood as it’s really aesthetically pleasing cannot recommend him in his crew more highly. We hope to work with them again in the future as no needs arise thank you so much guys

Sabrina ChamberlainGoogle review · July 2026
COMMON QUESTIONS

Fence & Gate in Playa Vista — questions answered.

Straight answers about permits, timelines, materials, and what actually determines the result.

Yes. Fency Builders Inc. (CSLB #1104099, B — General Building) reviews fence & gate requests in Playa Vista and nearby areas including The Bluffs, Runway district, Concert Park, Campus at Playa Vista edge. Contract eligibility and any required specialty licensee are confirmed in writing.

PLAYA VISTA PROJECT REQUEST

Tell us about the property.

Send the address area, the type of work, and what matters most. We review the details before the first conversation.

(818) 747-4020Fency Builders Inc · CSLB License #1104099
Serving Playa Vista and greater Los Angeles

Your information is used only to respond to your request.